Latest H35-580_V2.0 Exam Format | 100% Free Professional HCIA-5G-RNP&RNO V2.0 Interactive Practice Exam

BONUS!!! Download part of PremiumVCEDump H35-580_V2.0 dumps for free: https://drive.google.com/open?id=1xwk4zY0CPlYpnBCHzy14w8Ib608lkxdH

With our professional experts' unremitting efforts on the reform of our Huawei H35-580_V2.0 guide materials, we can make sure that you can be focused and well-targeted in the shortest time when you are preparing a test, simplify complex and ambiguous contents. With the assistance of our Huawei H35-580_V2.0 Study Guide you will be more distinctive than your fellow workers.

Huawei H35-580_V2.0 Exam Syllabus Topics:

SectionObjectives
Topic 1: Radio Network Optimization (RNO)- Coverage and interference optimization
- KPI monitoring and analysis
- Mobility optimization (handover, cell reselection)
Topic 2: 5G Performance and Troubleshooting- Fault diagnosis and optimization methods
- Drive test and data analysis
Topic 3: 5G Fundamentals- 5G NR principles and key technologies
- 5G network architecture and key concepts
Topic 4: Radio Network Planning (RNP)- Site selection and parameter planning
- Capacity planning and dimensioning
- Coverage planning principles

>> Latest H35-580_V2.0 Exam Format <<

Easiest and Quick Way to Pass Huawei H35-580_V2.0 Exam

With many advantages such as immediate download, simulation before the real test as well as high degree of privacy, our H35-580_V2.0 actual exam survives all the ordeals throughout its development and remains one of the best choices for those in preparation for exams. Many people have gained good grades after using our H35-580_V2.0 real test, so you will also enjoy the good results. Donโ€™t hesitate any more. Time and tide wait for no man. If you really long for recognition and success, you had better choose our H35-580_V2.0 exam demo since no other exam demo has better quality than our H35-580_V2.0 training questions.

Huawei HCIA-5G-RNP&RNO V2.0 Sample Questions (Q23-Q28):

NEW QUESTION # 23
The distribution link of the smart grid will use both wireless and wired networks.

Answer: A

Explanation:
Smart grid distribution networks commonly employ a combination of wired and wireless communication technologies to ensure reliability, coverage, and operational flexibility.


NEW QUESTION # 24
In RAN3.0, what is the minimum configuration of PDCCH bandwidth in a cell-specific BWP?

Answer: B

Explanation:
The minimum configurable PDCCH bandwidth within a cell-specific BWP is 6 Resource Blocks.


NEW QUESTION # 25
How many RBs are included when a bandwidth of 100 MHz and a subcarrier spacing of 60 kHz are used in a
5G cell?

Answer: B

Explanation:
Explanation
To find the number of RBs in a 5G cell, we need to know the bandwidth and the subcarrier spacing of the cell.
The bandwidth is the total frequency range allocated for the cell, while the subcarrier spacing is the frequency separation between adjacent subcarriers in the cell. A RB is a group of 12 consecutive subcarriers in the frequency domain 12. Therefore, the number of RBs in a 5G cell can be calculated by dividing the bandwidth by the product of the subcarrier spacing and 12.
Given that the bandwidth is 100 MHz and the subcarrier spacing is 60 kHz, we can use the following formula to find the number of RBs:
Number of RBs = Bandwidth / (Subcarrier spacing * 12) Number of RBs = 100 MHz / (60 kHz * 12) Number of RBs = 100000 kHz / 720 kHz Number of RBs = 138.888...
However, since the number of RBs must be an integer, we need to round it down to the nearest multiple of
3 3. This is because the NR standard defines different frequency ranges for different subcarrier spacings, and each frequency range has a minimum and maximum number of RBs that are multiples of 3 4. For example, for subcarrier spacing of 60 kHz, the frequency range is from 24250.08 MHz to 52600.08 MHz, and the minimum and maximum number of RBs are 66 and 273, respectively.
Therefore, the closest multiple of 3 to 138.888... is 135. However, this number is not valid because it is lower than the minimum number of RBs for subcarrier spacing of 60 kHz. The next valid multiple of 3 is 273, which is also the maximum number of RBs for subcarrier spacing of 60 kHz. Therefore, the correct answer is C. 273.


NEW QUESTION # 26
Which of the following statements about the advantages of the Rayce ray tracing model are correct?(Select All that Apply)

Answer: B,D

Explanation:
Explanation
The Rayce ray tracing model is a propagation model that computes propagation paths using 3-D environment geometry 3. It is based on the shooting and bouncing rays (SBR) method, which launches rays from the transmitter and traces their reflections and diffractions until they reach the receiver or are attenuated below a threshold 4. The Rayce ray tracing model offers more accurate path searching, reflection, and diffraction energy calculation for electromagnetic wave propagation than other models, such as empirical models or deterministic models 5. It also offers higher level prediction accuracy, especially for massive MIMO systems that use beamforming techniques 6. The Rayce ray tracing model is not applicable only to C-band, but also to mmWave and other frequency bands 7.


NEW QUESTION # 27
In the MR-DC architecture, which of the following factors affect the data split on a base station?(Select All that Apply)

Answer: A,B,D

Explanation:
Explanation
According to the 5G-NR (EN-DC) Bearer Concept, in MR-DC (Multi-Radio Dual Connectivity) architecture, data split on a base station can be affected by the following factors:
PDCP layer buffer: The PDCP layer buffer stores user plane data before sending it to lower layers. The buffer size and occupancy can affect how data is split between LTE and NR bearers.
X2 latency: The X2 latency is the delay between LTE and NR base stations over the X2 interface. The X2 latency can affect how data is split between LTE and NR bearers by causing reordering or duplication of packets.
Air interface latency: The air interface latency is the delay between base stations and user equipment over the air interface. The air interface latency can affect how data is split between LTE and NR bearers by causing reordering or duplication of packets.
The RLC layer buffer does not affect data split on a base station because it is located below the PDCP layer where data split occurs.


NEW QUESTION # 28
......

PremiumVCEDump never hits its customers with any kind of scam instead they are offered with 100% authentic products for Huawei H35-580_V2.0 exam preparation. It is our honor to serve you with ever best offering and delivering the core values for your spent pennies. Failure is unusual with H35-580_V2.0 training but if any misfortune leads you towards failure, no issues for financial loss. PremiumVCEDump will repay you all the charges that you have paid for our H35-580_V2.0 exam products.

H35-580_V2.0 Interactive Practice Exam: https://www.premiumvcedump.com/Huawei/valid-H35-580_V2.0-premium-vce-exam-dumps.html

BTW, DOWNLOAD part of PremiumVCEDump H35-580_V2.0 dumps from Cloud Storage: https://drive.google.com/open?id=1xwk4zY0CPlYpnBCHzy14w8Ib608lkxdH