BONUS!!! Download part of DumpTorrent MB-335 dumps for free: https://drive.google.com/open?id=1V5ITWQ0_J95qC3MkSGB9q5JEl8jzETkq
DumpTorrent is a very good website for Microsoft certification MB-335 exams to provide convenience. According to the research of the past exam exercises and answers, DumpTorrent can effectively capture the content of Microsoft Certification MB-335 Exam. DumpTorrent's Microsoft MB-335 exam exercises have a very close similarity with real examination exercises.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Implement additional supply chain management features | 10-15% | - Configure advanced planning and supplementary functions
|
| Topic 2: Configure production prerequisites | 20-25% | - Set up production parameters and resources
|
| Topic 3: Implement production methods | 15-20% | - Configure and use different production types
|
| Topic 4: Configure products | 15-20% | - Implement advanced product information management
|
| Topic 5: Configure production control | 20-25% | - Manage production lifecycle and operations
|
>> MB-335 Reliable Exam Papers <<
If you care about your certification MB-335 exams, our MB-335 test prep materials will be your best select. We provide free demo of our MB-335 training materials for your downloading before purchasing complete our products. Demo questions are the part of the complete MB-335 test prep and you can see our high quality from that. After payment you can receive our complete MB-335 Exam Guide soon in about 5 to 10 minutes. And we offer you free updates for MB-335 learning guide for one year. Stop to hesitate, just go and choose our MB-335 exam questions!
NEW QUESTION # 168
A company sells chemicals that require special instructions for disposal and remediation due to toxicity regulatory requirements.
The company requires that when a sales order's packing slip is printed for a product that contains a toxic chemical, the instructions must also be printed for inclusion in the shipment.
You need to configure the system to meet the requirements.
Which configurations should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 169
You need to configure the requirements for metal fabrication equipment maintenance. What must you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 170
You need to configure the system to meet the requirements.
What should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 171
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.
The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. Ingredient A is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.
You need to ensure that the system is set up to support the manufacturing process.
Solution: Create a dimension-based product with configurations. Use a price model to calculate the different configurable option costs.
Does the solution meet the goal?
Answer: B
Explanation:
No, the solution does not meet the goal. A dimension-based product with configurations is used for discrete manufacturing, not process manufacturing. A price model is used to calculate the cost of different configurations of a product, not the cost of different concentrations of an ingredient. For process manufacturing, you need to use a formula-based product with batch attributes and potency management. A formula defines the materials, ingredients, and outcomes of a specific process. Batch attributes are used to capture the characteristics of a batch of products or ingredients. Potency management is used to adjust the quantity of an ingredient based on its concentration or strength1.
1: Configure formulas for process manufacturing in Dynamics 365 Supply Chain Management - Training | Microsoft Learn
Topic 3, Case Study 3 Adventure Works
This is a case study.Case studies are not timed separately.You can use as much exam time as you would like to complete each case.However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question on this case study, click theNextbutton. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has anAll Informationtab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click theQuestionbutton to return to the question.
Background
Adventure Works Cycles is a high-end bicycle manufacturer in North America. Their standard model bicycles are available year-round. Limited-edition bicycle models are released several times a year to boutique retailers domestically.
Adventure Works has had the most success with their limited-edition bicycles. These bicycles have high margins, are in high demand, and have a strong following with the younger generation biking community.
Current environment
General
Adventure Works expects to triple their manufacturing capabilities in the next few years due to increasing demand. The company plans to invest in Dynamics 365 Finance, Dynamics 365 Supply Chain Management, and the Power Platform products to migrate from a custom-built enterprise resource planning (ERP) solution and Microsoft Excel worksheets.
Adventure Works sells only to the United States and Canada. Despite their limited market, they cannot keep up with current demand. Over time, they want to expand their market to remain profitable.
Adventure Works has no capabilities or budget to undertake any development beyond Excel formula-level tasks.
Bicycle manufacturing
* Bicycle models are measured and reported against how well a single model performs as a sum of all the variations of that model. For example, the Street Kid YOLO model sold 25,000 units in 2019 across all variations of the product, but the Purple Female frame made up 30 percent of that model's sales.
* The Street Kid YOLO models sell in different volumes depending on the market.
* The creation of production orders for bicycles occurs monthly and is based on historical sales.
* Each part of a bicycle's assembly occurs at a different station in the Adventure Works production facility.
* A piece of paper that has eight sections accompanies a bicycle throughout the manufacturing process.
As each step is completed, the respective section is completed and signed off by a production worker.
* The completed paper is used in the put-away process by the warehouse workers.
Financials
* The standard model and limited-edition bicycle teams are separate operating units within the manufacturing division. Financials are tracked and reported separately even though they are produced and sold in the same sales channels.
* Updates to the standard model bicycle models are created when a part for a bicycle becomes unavailable. This can change the cost of the product.
* An updated model of a bicycle with new parts will be maintained as a new item and have a new price.
However, it will look like the exact same product to retailers and distributors.
Manufacturing process
The bicycle manufacturing process is shown in the following graphic:
Limited-edition bicycle process
The limited-edition bicycles are made up of an Adventure Works custom frame with all other parts created by local artists and manufacturers.
* Each bicycle has a unique set of new items that make up the bill of materials (BOM) because all parts are created to specification.
* A single pilot limited-edition bicycle is created as a proof of concept.
* Adventure Works occasionally reuses components from existing bicycles, but most limited-edition bicycles are made of handcrafted components designed to specifications.
* Each limited-edition bicycle is built, and hand signed by a single Adventure Works artisan.
* Sales price must be auto calculated after the cost price is derived.
* Before creating the proof of concept limited-edition bicycle, the approximate sales price needs to be determined through a cost-plus 20 percent calculation.
* All items except for the frame in the prototype process are considered finished items and can be sold individually.
* The frame items require modifications in accordance with the manufacturing process as well as painting.
* Each Adventure Works limited-edition bicycle artisan is scheduled to create a specific number of bicycles in a production run that must be completed by a certain date.
* Limited-edition bicycle artisans work exclusively on a given run of limited-edition bicycles and are not able to work on other tasks.
Limited-edition bicycle BOM assembly process
The prototype process for the limited-edition bicycles is shown in the following graphic:
Requirements
General
* Adventure Works will consist of three legal entities: the primary legal entity of the United States (AWUS), sales in Canada (AWCA), and an international expansion (AWIN).
* AWIN must be able to sell only standard model bicycles.
* AWUS and AWCA must be able to sell both standard model and limited-edition bicycles.
* Warehouse workers must use the Warehouse Management mobile application to manage all inventory
* inbound and outbound from the warehouse.
Bicycle manufacturing
* The handlebars, back wheels, and front wheels must not change for any of the bicycle model configurations.
* Standard model bicycle production scheduling must be configured to start as soon as possible.
* Bicycle components must be automatically reserved when the item is released to the production floor.
* Standard model bicycle production must be automatically created on a predefined schedule.
* As soon as bicycles are completed, they must be available to fulfill the backlog of orders.
* Limited-edition bicycle production must be configured to meet the end date for when the bicycles must be completed.
* Production orders need to track financials by standard model or limited-edition bicycle manufacturing teams.
* The system must log the immediate consumption of BOMs for traceability.
* All inventory is warehouse enabled.
* Finished goods are reported as finished by the warehouse worker who picks up the finished product from the packaging area.
* Finished products must automatically have put-away work completed for them.
New limited-edition bicycle process
Adventure Works is creating a new, limited-edition bicycle to commemorate the company's tenth anniversary.
The limited-edition bicycle will be designed for charity events and be produced for the summer season.
* The bicycle must be available in men's, women's, and unisex frame styles. It will be painted in one of
50 hand-painted designs representing the charity of the customer's choosing.
* A limited run of 100 bicycles must be created.
* The limited-edition bicycles must use the same production process as the standard model bicycles.
* The limited-edition bicycles must use the same parts used for previous limited-edition bicycles, except for the unique paint colors.
* Frames must be painted in-house.
* Five painting options are available only in the unisex frame style.
New limited-edition bicycle orders
* Customers must be able to place sales orders for the item in the chosen frame configuration, including style and color.
* When an order for the new limited-edition bicycle is created, payment must be provided.
* An approval for an order must exist for the order to be processed.
* Upon approval of an order, production must start immediately and not require re-entry of data.
NEW QUESTION # 172
A process manufacturing company is implementing Dynamics 365 Supply Chain Management. The company will use multiple process manufacturing functionalities including by-products.
You need to configure by-product formula allocation methods.
Which methods should you use? To answer, drag the appropriate by-product burden allocation methods to the correct scenarios. Each method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 173
......
DumpTorrent is an authoritative study platform to provide our customers with different kinds of MB-335 practice torrent to learn, and help them accumulate knowledge and enhance their ability to pass the exam as well as get their expected scores. There are three different versions of our MB-335 Study Guide: the PDF, the Software and the APP online. To establish our customers' confidence and avoid their loss for choosing the wrong exam material, we offer related free demos of MB-335 exam questions for our customers to download before purchase.
MB-335 New Braindumps Questions: https://www.dumptorrent.com/MB-335-braindumps-torrent.html
P.S. Free 2026 Microsoft MB-335 dumps are available on Google Drive shared by DumpTorrent: https://drive.google.com/open?id=1V5ITWQ0_J95qC3MkSGB9q5JEl8jzETkq