There are many certificates for you to get but which kind of certificate is most authorized, efficient and useful? We recommend you the NSEI_OTS_AR-7.6 certificate because it can prove that you are competent in some area and boost outstanding abilities. If you buy our NSEI_OTS_AR-7.6 study materials you will pass the test smoothly and easily. We boost professional expert team to organize and compile the NSEI_OTS_AR-7.6 Training Materials diligently and provide the great service which include the service before and after the sale, the 24-hours online customer servic on our NSEI_OTS_AR-7.6 exam questions.
| Section | Weight | Objectives |
|---|---|---|
| Network Access Control | 25% | - Purdue Model and secure network segmentation - OT Ethernet and industrial communication models - Authentication and access policies for OT devices |
| Asset Management | 25% | - Fortinet Security Fabric for OT environments - OT security standards and compliance (IEC 62443, NIST) - Device detection and inventory using FortiGate & FortiNAC |
| Monitoring and Risk Assessment | 25% | - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 |
| Network Security | 25% | - Security automation and threat response - Virtual patching for legacy OT systems - Deep inspection for industrial protocols (Modbus, DNP3, OPC) |
>> Exam Vce Fortinet NSEI_OTS_AR-7.6 Free <<
Of course, when you are seeking for exam materials, it is certain that you will find many different materials. However, through investigation or personal experience, you will find UpdateDumps questions and answers are the best ones for your need. The candidates have not enough time to prepare the exam, while UpdateDumps certification training materials are to develop to solve the problem. So, it can save much time for us. What's more important, 100% guarantee to pass Fortinet NSEI_OTS_AR-7.6 Exam at the first attempt. In addition, UpdateDumps exam dumps will be updated at any time. If exam outline and the content change, UpdateDumps can provide you with the latest information.
NEW QUESTION # 36
You would like to customize your current FortiAnalyzer report to provide a better risk assessment of your OT network. Which two options can you use to enhance your report? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are B. The Datasets library and D. The Chart library .
The study guide explains that a FortiAnalyzer report is built from charts, and that charts consist of two elements: datasets and format . It states: "A FortiAnalyzer report is a set of data organized in charts" and "Charts consist of two elements: Datasets ... and Format." It then goes further in the Customizing Reports section and explicitly says "By default, the Chart Library contains more than 300 charts" and
"By default, the Datasets library contains almost 400 datasets." It also states that you can clone and edit both charts and datasets, and create new ones , which is exactly how you enhance and customize an existing report.
The other options are not the best answers for this question. FortiView can export a chart into a report chart, and Log View can help build a custom dataset and chart from search results, but the question asks which options you can use to enhance the report itself. The study guide identifies the actual report-customization components as the Chart Library and Datasets library . Dashboard library is not presented as a FortiAnalyzer report customization library in this section.
NEW QUESTION # 37
Refer to the exhibit.
A basic event handler is shown. You have enabled Automation Stitch to automate the handling of an alert.
Which two steps must you take to use this automation stitch? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are C and D .
Option D is correct because the study guide states that the configuration of an event handler can include
"Rules" and explains that "Rules are granular conditions" and "Event handlers can have one or more rules." It further states that "FortiAnalyzer uses event handlers to filter all incoming logs" and "If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Therefore, to use the automation stitch, you must define the rules on FortiAnalyzer so the event handler can actually generate the event that starts the automation flow.
Option C is also correct. The study guide explains that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to the FortiGate side, and in the attack-detection example it says "FortiAnalyzer parses the logs and notifies the root FortiGate" and then
"The root FortiGate triggers the action." It also explicitly shows "Stitches configured on root FortiGate." This means the FortiGate must have the corresponding automation trigger configured for the FortiAnalyzer event handler notification.
Option A is incorrect because the study guide does not describe configuring an Action on FortiAnalyzer as the required step for this FortiAnalyzer-to-FortiGate automation-stitch flow. Option B is also incorrect because playbooks are a different FortiAnalyzer automation mechanism; the question specifically refers to using the Automation Stitch option in the event handler.
NEW QUESTION # 38
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and C .
Option C is correct because the profile clearly contains the Operational Technology category and specific OT application signatures such as Modbus and IEC.60870.5.104 . The study guide says "You can use application control signatures to detect OT protocols" and "You can filter to a specific OT protocol." That means OT application signatures are active in this sensor profile.
Option A is correct because the guide explains that application control works at different levels: "Detection of protocol (one detection per session)" and "Message level (one detection per protocol message)." It also says you can use application signatures for "granular message type identification." In the exhibit, IEC.
60870.5.104.Control.Functions is explicitly configured, which is a granular IEC message/control-level signature rather than only a protocol-level match. That means logging and control can occur at the IEC command level.
Option B is not correct because the profile shows Modbus configured at the parent protocol level as Monitor
, while the guide states that the "parent signature takes precedence over the child signature." Since protocol-level detection is one detection per session , that does not mean FortiGate will necessarily log each Modbus command individually.
Option D is incorrect because even though the broader Operational Technology category is set to block, the profile includes specific application and filter overrides for Modbus and IEC 104 behavior. So the resulting effect is not simply that all OT protocols are blocked .
NEW QUESTION # 39
You want to gain complete visibility of the entire attack surface using FortiAnalyzer.
Which two views must you use to achieve this result? (Choose two.)
Answer: A,E
Explanation:
The correct answers are C and E . Fortinet states that the SOC Dashboard provides an effective visualization of reported incidents and events and, through Security Fabric integration, enables administrators to gain complete visibility of the entire attack surface . The MITRE ATT CK Attack view complements this by presenting incident and event information according to ATT & CK-defined attack tactics and techniques, allowing analysts to understand where observed activity maps into known adversary behavior. The MITRE Coverage view has a different purpose-it measures event-handler coverage-while the Attack view focuses on actual incidents and events. Risk Summary and Resources Reports are associated primarily with FortiSIEM reporting functions, and Analytics Search is a query and investigation mechanism rather than a consolidated attack-surface view. Therefore, the required FortiAnalyzer views are MITRE ATT & CK Attack and SOC Dashboard .
NEW QUESTION # 40
Refer to the exhibit.
A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and D . The study guide provides a direct use case called Attack Detection and Automated Alert . It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate .
The second required configuration is an event handler on FortiAnalyzer . The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow . An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate .
NEW QUESTION # 41
......
Although the pass rate of our NSEI_OTS_AR-7.6 study materials can be said to be the best compared with that of other exam tests, our experts all are never satisfied with the current results because they know the truth that only through steady progress can our NSEI_OTS_AR-7.6 Preparation braindumps win a place in the field of exam question making forever. Therefore, buying our NSEI_OTS_AR-7.6 actual study guide will surprise you with high grades and you are more likely to get the certification easily.
NSEI_OTS_AR-7.6 Reliable Test Pdf: https://www.updatedumps.com/Fortinet/NSEI_OTS_AR-7.6-updated-exam-dumps.html