P.S. Free & New JN0-481 dumps are available on Google Drive shared by ActualTestsIT: https://drive.google.com/open?id=1LTBpCCW_qpRua0g8v2eyuv9eHVkswJYQ
As we all know that if you can obtain the JN0-481 certification, your life will change from now on. There will be various opportunities waiting for you. You take the initiative. It is up to you to make a decision. We only live once. Donโt postpone your purpose and dreams. Our JN0-481 Real Exam will escort your dreams. You will get better jobs as well as higher salaries to lead a better life. Come to fight for your bright future and buy our JN0-481 practice braindumps right now!
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Are you still worried about not able to pass JN0-481 exam certification? Then you can ask ActualTestsIT for help. It can bring you the master of the sophisticated techniques of IT industry and help you pass JN0-481 certification exam easily. With ActualTestsIT's efforts for years, the passing rate of JN0-481 Certification Exam has reached as high as 100%. Choosing ActualTestsIT is to choose the way to go to a beautiful future.
NEW QUESTION # 67
What does clicking the indicated icon shown in the exhibit accomplish?
Answer: D
Explanation:
In Apstra 5.1, the Staged > Physical > Links workspace is where you build and validate the cabling (link) intent for the fabric before committing changes. During deployment and day-0/1 build, Apstra can leverage LLDP neighbor discovery from the connected devices to accelerate and validate the cabling map. The indicated toolbar icon in the Links view is used to fetch discovered LLDP data from the devices so Apstra can compare the discovered neighbor relationships with the intended topology and, depending on workflow, help populate or validate link endpoints.
This is particularly important in leaf-spine IP fabrics because correct physical connectivity underpins the entire underlay-interface states, point-to-point addressing, and BGP sessions. In an EVPN-VXLAN design running Junos v24.4, broken or mis-cabled links quickly manifest as missing underlay adjacencies and failed EVPN control-plane signaling. Pulling LLDP discovery into Apstra helps you identify mismatches early (wrong neighbor, wrong port, missing neighbor) and reduces manual cabling errors.
This action is not merely a UI refresh, it does not wipe the cable map, and it does not modify link speeds. Its operational purpose is to import discovered LLDP neighbor information into the blueprint's physical link view so Apstra can assist with accurate topology validation and deployment readiness.
NEW QUESTION # 68
You want to remove a leaf device from a Juniper Apstra blueprint permanently. What is the correct high-level sequence of steps?
Answer: D
Explanation:
To safely and permanently remove a leaf device from a Juniper Apstra blueprint, the device should first be set to Drain mode to gracefully move traffic away from it, then transitioned to Undeploy mode to remove its configuration from the device. Once undeployed, the device can be safely removed from the blueprint without causing disruption to the rest of the fabric.
NEW QUESTION # 69
You are working to build an ESI-LAG for a multihomed server. The ESI-LAG is not coming up as multihomed.
Referring to the exhibit, what are two solutions to this problem? (Choose two.)
Answer: A,C
Explanation:
An ESI-LAG is a link aggregation group (LAG) that spans two or more devices and is identified by an Ethernet segment identifier (ESI). An ESI-LAG provides redundancy and load balancing for a multihomed server in an EVPN-VXLAN network. To configure an ESI-LAG, you need to ensure that the following requirements are met:
The LACP system ID on both devices must be the same. This ensures that the LACP protocol can negotiate the LAG parameters and form a single logical interface for the server.
The ESI ID on both devices must be the same. This ensures that the EVPN control plane can advertise the ESI-LAG as a single Ethernet segment and synchronize the MAC and IP addresses of the server across the devices.
The VLAN ID and VNI on both devices must be the same. This ensures that the server can communicate with other hosts in the same virtual network and that the VXLAN encapsulation and decapsulation can work properly.
In the exhibit, the LACP system ID and the ESI ID on both devices are different, which prevents the ESI-LAG from coming up as multihomed. Therefore, the correct answer is B and D. The LACP system ID on both devices must be the same and the ESI ID on both devices must be the same.
NEW QUESTION # 70
In the EVPN-VXLAN data center fabric bridged overlay architecture shown in the exhibit, the servers are connected to Lead and Leat6 using the same virtual network identifier (VNI). Which two statements are correct in this scenario? (Choose two.)
Answer: B,D
Explanation:
In the EVPN-VXLAN data center fabric bridged overlay architecture shown in the exhibit, the servers are connected to Leaf1 and Leaf6 using the same virtual network identifier (VNI). This means that the servers belong to the same Layer 2 domain and can communicate with each other using VXLAN tunnels across the fabric. The underlay network provides the IP connectivity between the leaf and spine devices, and it uses EBGP as the routing protocol. Therefore, the following two statements are correct in this scenario:
Loopback IPv4 addresses must be advertised into the EBGP underlay from leaf and spine devices. This is because the loopback addresses are used as the source and destination IP addresses for the VXLAN tunnels, and they must be reachable by all the devices in the fabric.
The loopback addresses are also used as the router IDs and the BGP peer addresses for the EBGP sessions.
The underlay EBGP peering's must be established between leaf and spine devices. This is because the EBGP sessions are used to exchange the underlay routing information and the EVPN routes for the overlay network. The EBGP sessions are established using the loopback addresses of the devices, and they follow a spine-and-leaf topology, where each leaf device peers with all the spine devices, and each spine device peers with all the leaf devices.
NEW QUESTION # 71
You have created a blueprint and are in the process of assigning systems. You require the leaf3-sonic device in the blueprint but do not want it to actively participate in the routing of the IP fabric.
In the Juniper Apstra UI, which two modes satisfy this requirement? (Choose two.)
Answer: C,D
Explanation:
Apstra deploy modes control how far a device progresses in the configuration lifecycle and whether it becomes active in the fabric. If you must keep leaf3-sonic present in the blueprint (modeled, cabled, and available for future use) but you do not want it to participate in IP-fabric routing, you use modes that keep the device not active.
Ready mode assigns the device to the blueprint and applies only "Ready (Discovery 2)" level configuration-hostnames, interface descriptions, and port speed/breakout settings-while explicitly keeping the device out of fabric routing. In this mode, Apstra does not configure routing/BGP or L3 interface addressing for the IP fabric, so the switch is staged and visible for validation (for example, LLDP wiring checks) but does not forward as part of the Clos underlay.
Undeploy mode removes the complete Apstra service configuration from the device. Operationally, this also ensures the device is not active in the fabric. It is commonly used when a device must be retained in the blueprint inventory/topology but should not be participating (for example, temporarily withdrawn, decommission preparation, or held as a spare).
By contrast, Deploy makes the device active (full rendered fabric configuration, including BGP), and Drain is a maintenance state used to gracefully remove traffic from an already-active device rather than a state for keeping it non-participatory from the outset.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra6.0/apstra-user-guide/topics/topic-map/device-config-lifecycle.html
https://www.juniper.net/documentation/us/en/software/apstra4.2/apstra-user-guide/topics/topic-map/device-config-lifecycle.html
NEW QUESTION # 72
......
Our website experts simplify complex concepts of the JN0-481 exam questions and add examples, simulations, and diagrams to explain anything that might be difficult to understand. Therefore, even ordinary examiners can master all the JN0-481 learning materials without difficulty. And the price of our JN0-481 Study Guide is reasonable for even the students can afford it. At the same time, we give some discounts from time to time, you can buy our JN0-481 practice engine at a favorable price.
Latest JN0-481 Test Vce: https://www.actualtestsit.com/Juniper/JN0-481-exam-prep-dumps.html
BTW, DOWNLOAD part of ActualTestsIT JN0-481 dumps from Cloud Storage: https://drive.google.com/open?id=1LTBpCCW_qpRua0g8v2eyuv9eHVkswJYQ