DOWNLOAD the newest RealVCE DOP-C02 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1PB6AZWkDXLABnuB9uvliKdjbwEtBb1VY
Well preparation is half done, so choosing good DOP-C02 training materials is the key of clear exam in your first try with less time and efforts. Our website offers you the latest preparation materials for the DOP-C02 real exam and the study guide for your review. There are three versions according to your study habit and you can practice our DOP-C02 Dumps PDF with our test engine that help you get used to the atmosphere of the formal test.
| Section | Weight | Objectives |
|---|---|---|
| Incident and Event Management | 18% | - Operational response and recovery
|
| Security and Compliance Automation | 13% | - Security automation in CI/CD and infrastructure
|
| Monitoring and Logging | 15% | - Observability and metrics
|
| Configuration Management and Infrastructure as Code | 17% | - Infrastructure provisioning and automation
|
| Resilient Cloud Solutions | 15% | - High availability and fault tolerance design
|
| SDLC Automation | 22% | - CI/CD pipeline design and implementation
|
>> DOP-C02 Latest Exam Notes <<
Our DOP-C02 Study Materials are written by experienced experts in the industry, so we can guarantee its quality and efficiency. The content of our DOP-C02 study materials is consistent with the proposition law all the time. We can't say it’s the best reference, but we're sure it won't disappoint you. This can be borne out by the large number of buyers on our website every day. A wise man can often make the most favorable choice, I believe you are one of them.
NEW QUESTION # 228
A company has an application that runs on Amazon EC2 instances behind an Application Load Balancer (ALB) The EC2 Instances are in multiple Availability Zones The application was misconfigured in a single Availability Zone, which caused a partial outage of the application.
A DevOps engineer made changes to ensure that the unhealthy EC2 instances in one Availability Zone do not affect the healthy EC2 instances in the other Availability Zones. The DevOps engineer needs to test the application's failover and shift where the ALB sends traffic During failover. the ALB must avoid sending traffic to the Availability Zone where the failure has occurred.
Which solution will meet these requirements?
Answer: B
Explanation:
Turn off cross-zone load balancing on the ALB's target group:
* Cross-zone load balancing distributes traffic evenly across all registered targets in all enabled Availability Zones. Turning this off will ensure that each target group only handles requests from its respective Availability Zone.
* To disable cross-zone load balancing:
* Go to the Amazon EC2 console.
* Navigate to Load Balancers and select the ALB.
* Choose the Target Groups tab, select the target group, and then select the Group details tab.
* Click on Edit and turn off Cross-zone load balancing.
Use Amazon Route 53 Application Recovery Controller to start a zonal shift away from the Availability Zone:
* Amazon Route 53 Application Recovery Controller provides the ability to control traffic flow to ensure high availability and disaster recovery.
* By using Route 53 Application Recovery Controller, you can perform a zonal shift to redirect traffic away from the unhealthy Availability Zone.
* To start a zonal shift:
* Configure Route 53 Application Recovery Controller by creating a cluster and control panel.
* Create routing controls to manage traffic shifts between Availability Zones.
* Use the routing control to shift traffic away from the affected Availability Zone.
References:
* Disabling cross-zone load balancing
* Route 53 Application Recovery Controller
NEW QUESTION # 229
A company has a single developer writing code for an automated deployment pipeline. The developer is storing source code in an Amazon S3 bucket for each project. The company wants to add more developers to the team but is concerned about code conflicts and lost work The company also wants to build a test environment to deploy newer versions of code for testing and allow developers to automatically deploy to both environments when code is changed in the repository.
What is the MOST efficient way to meet these requirements?
Answer: D
Explanation:
Explanation
Creating an AWS CodeCommit repository for each project, using the main branch for production code, and creating a testing branch for code deployed to testing will meet the requirements. AWS CodeCommit is a managed revision control service that hosts Git repositories and works with all Git-based tools1. By using feature branches to develop new features and pull requests to merge code to testing and main branches, the developers can avoid code conflicts and lost work, and also implement code reviews and approvals. Option B is incorrect because creating another S3 bucket for each project for testing code and using an AWS Lambda function to promote code changes between testing and production buckets will not provide the benefits of revision control, such as tracking changes, branching, merging, and collaborating. Option C is incorrect because using the main branch for production and test code with different deployment pipelines for each environment will not allow the developers to test their code changes before deploying them to production.
Option D is incorrect because enabling versioning and branching on each S3 bucket will not work with Git-based tools and will not provide the same level of revision control as AWS CodeCommit. References:
* AWS CodeCommit
* Certified DevOps Engineer - Professional (DOP-C02) Study Guide (page 182)
NEW QUESTION # 230
A company uses AWS CodeArtifact to centrally store Python packages. The CodeArtifact repository is configured with the following repository policy.
A development team is building a new project in an account that is in an organization in AWS Organizations.
The development team wants to use a Python library that has already been stored in the CodeArtifact repository in the organization. The development team uses AWS CodePipeline and AWS CodeBuild to build the new application. The CodeBuild job that the development team uses to build the application is configured to run in a VPC Because of compliance requirements the VPC has no internet connectivity.
The development team creates the VPC endpoints for CodeArtifact and updates the CodeBuild buildspec yaml file. However, the development team cannot download the Python library from the repository.
Which combination of steps should a DevOps engineer take so that the development team can use Code Artifact? (Select TWO.)
Answer: D,E
Explanation:
Explanation
"AWS CodeArtifact operates in multiple Availability Zones and stores artifact data and metadata in Amazon S3 and Amazon DynamoDB. Your encrypted data is redundantly stored across multiple facilities and multiple devices in each facility, making it highly available and highly durable."
https://aws.amazon.com/codeartifact/features/ With no internet connectivity, a gateway endpoint becomes necessary to access S3.
NEW QUESTION # 231
A DevOps engineer needs to configure an AWS CodePipeline pipeline that publishes container images to an Amazon Elastic Container Registry (Amazon ECR) repository. The pipeline must wait for the previous run to finish and must run when new Git tags are pushed to a Git repository that is connected to AWS CodeConnections. An existing deployment pipeline needs to run in response to the publication of new container images.
Which solution will meet these requirements?
Answer: C
Explanation:
The requirements clearly indicate the need for modern CodePipeline capabilities, strict execution ordering, Git tag-based triggers, and loose coupling between pipelines. CodePipeline V2 introduces execution modes such as QUEUED and SUPERSEDED, along with native support for advanced trigger filtering when using AWS CodeConnections.
The requirement that the pipeline must wait for the previous run to finish directly maps to QUEUED mode, which ensures that pipeline executions run sequentially rather than replacing in-progress executions. SUPERSEDED mode would cancel the running execution, which violates the requirement.
Triggering the pipeline when new Git tags are pushed is supported through CodePipeline V2 trigger filters using refs/tags/*. Branch-based triggers would not satisfy this condition.
Finally, the requirement that an existing deployment pipeline runs in response to new container images is best met using Amazon EventBridge, which natively emits events for ECR image push actions. EventBridge allows decoupled, event-driven orchestration between pipelines without tight dependencies or custom scripting. This is the AWS-recommended approach for pipeline-to-pipeline coordination.
Options C and D rely on CodePipeline V1, which lacks modern trigger filtering and execution control. Option B incorrectly uses SUPERSEDED mode and branch-based triggers.
Therefore, Option A correctly combines CodePipeline V2, QUEUED execution mode, tag-based triggers, and EventBridge-driven pipeline chaining, meeting all requirements with best practices and minimal operational complexity.
NEW QUESTION # 232
A DevOps learn has created a Custom Lambda rule in AWS Config. The rule monitors Amazon Elastic Container Repository (Amazon ECR) policy statements for ecr:' actions. When a noncompliant repository is detected, Amazon EventBridge uses Amazon Simple Notification Service (Amazon SNS) to route the notification to a security team.
When the custom AWS Config rule is evaluated, the AWS Lambda function fails to run.
Which solution will resolve the issue?
Answer: A
Explanation:
Step 1: Understanding Lambda Permissions and AWS Config
The custom AWS Config rule evaluates resources and invokes an AWS Lambda function when a compliance check is triggered. For AWS Config to invoke the Lambda function, it requires permission to do so.
Issue: The Lambda function fails to execute because AWS Config doesn't have permission to invoke it.
Action: Modify the resource-based policy of the Lambda function to grant AWS Config permission to invoke the Lambda function.
Why: Without this permission, AWS Config cannot trigger the Lambda function, which is why the evaluation fails.
Reference:
This corresponds to Option A: Modify the Lambda function's resource policy to grant AWS Config permission to invoke the function.
NEW QUESTION # 233
......
Our accurate, reliable, and top-ranked Amazon DOP-C02 exam questions will help you qualify for your Amazon DOP-C02 certification on the first try. Do not hesitate and check out excellent Amazon DOP-C02 Practice Exam to stand out from the rest of the others.
Latest DOP-C02 Training: https://www.realvce.com/DOP-C02_free-dumps.html
BONUS!!! Download part of RealVCE DOP-C02 dumps for free: https://drive.google.com/open?id=1PB6AZWkDXLABnuB9uvliKdjbwEtBb1VY