BTW, DOWNLOAD part of BootcampPDF MB-335 dumps from Cloud Storage: https://drive.google.com/open?id=1WvlBwo0luwi7cMb1isYroLStgQSMvX9a
This knowledge will help you in your career. The BootcampPDF is committed to ace the entire Microsoft MB-335 exam preparation process simple, quick, and smart. Microsoft MB-335 provides you with real-time Microsoft MB-335 exam environment for preparation. The Microsoft MB-335 exam questions prices are affordable.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Implement Warehouse Management | 15-20% | - Configure advanced warehouse features
|
| Topic 2: Configure Microsoft Dynamics 365 Supply Chain Management | 15-20% | - Configure number sequences
|
| Topic 3: Implement and Manage Supply Chain Management | 15-20% | - Configure procurement and sourcing
|
| Topic 4: Implement Product Information Management | 15-20% | - Configure product information
|
| Topic 5: Implement Transportation Management | 10-15% | - Manage transportation processes
|
| Topic 6: Implement Master Planning | 15-20% | - Run and monitor master planning
|
| Topic 7: Implement Inventory Management | 15-20% | - Configure inventory management
|
Getting the Microsoft MB-335 certification exam is necessary in order to get a job in your desired tech company. Success in the Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert (MB-335) certification exam gives you an edge over the others because you will have certified skills. The Microsoft MB-335 certification exam badge will make a good impression on the interviewer. Most of the people planning to attempt the MB-335 Exam are confused that how will they prepare and pass MB-335 exam with good grades. Many don't find real MB-335 exam questions and face loss of money and time.
NEW QUESTION # 219
A manufacturer uses Dynamics 365 Supply Chain Management to create bicycle parts as a configure-to-order configuration. All bicycle parts are sourced from external sources and assembled in the manufacturing facility.
The manufacturer plans to expand its capabilities to create custom bicycles parts in an engineer-to-order model. All bicycle parts will be created in the manufacturing facility. The custom bicycle parts must be omitted from any master planning process.
You need to describe the concepts for the requirements.
Which concepts should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 220
A company overstates on-hand raw materials due to the time it takes to post raw materials as consumed when production orders are processed.
All items used to manufacture finished goods must be consumed when a finished good is reported as finished.
You must not change all bill of materials lines to use the option of flushing principal.
You need to ensure that all production orders consume raw materials at Report as finished.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
Reference:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/production-parameters-manufac
NEW QUESTION # 221
You need to determine the batch values on the combined mix batches for OperatorA.
Which values should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 222
You need to calculate estimated consumption of ingredients for liquid cleaning solution.
What is the consumption? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Topic 2, CASE STUDY 1 Manufacturing Company
General information
A manufacturing company produces custom configured-to-order motorcycles. The company plans to implement Dynamics 365 Supply Chain Management. The company contains one legal entity located in Missouri where all production and warehousing operations occur.
Customization options
The custom motorcycles have a variety of selections that can be selected in the listed order by the end customer, including the following:
Customization restrictions
The following restrictions on customizations are in place:
* Green color can only be sold with the Legend Trim.
* Orange color can be sold with the Sport or Legend Trim.
* The ML seat must be included in the Legend package.
* The MS seat must be included in the Sport package.
Manufacturing facilities
The company includes the following manufacturing groups: Assembly and Plastic Molding. The Assembly group is responsible for assembling the motorcycles with purchased and manufactured goods. The Plastic Molding group is responsible for manufacture of all plastic parts used in the assembly area.
Motorcycle manufacturing
The parts for the product assembly are picked from the warehouse and staged at the correct workstation by a warehouse operator for each production order.
Plastic manufacturing
Plastic parts are molded using dyes that create multiple parts at once. The parts are machined in the same production process to remove excess plastic and add additional holes for assembly. Excess plastic is recycled back into the feedstock of the same color plastic chips for use in the molding process.
Metal Parts
Raw metal parts are purchased fully machined but without primer or paint. The parts are subcontracted to a vendor for primer and paint based upon the color requirements.
Facility
The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.
Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.
Requirements
The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.
Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.
Sales Order
The company has the following requirements for sales orders:
* During the configuration of a sales order, invalid combinations must be prevented.
* Each configuration must create a unique bill of material (BOM) and Route based on options selected.
* Sales pricing for the sales order must be based upon options selected.
* Due to emissions regulations, the motorcycles cannot be sold to the state of California.
Motorcycle manufacturing
The company has the following requirements for motorcycle manufacturing:
* Schedule labor only at the labor pool level without machines by day
* Produce motorcycles within a scheduled day in any order.
* Record actual production labor with start/stop times.
* Record manager approval of labor entered prior to posting.
* Post actual material consumption after production is finished.
Plastic manufacture
The company has the following requirements for motorcycle manufacturing:
* Schedule both labor and machines.
* Adjust schedules by using a Gantt chart.
* Backflush standard labor by operation.
* Post actual material consumption at the start of production.
* Track and allocate costs to the excess plastic.
* Report multiple molded part numbers during the same production run.
* Determine the correct mold to use on a production order.
* Generate a batch number for each production order.
Metal Parts
The company has the following requirements for metal parts manufacturing:
* Schedule shipments to the vendor for painting.
* Receive painted parts into inventory from the vendor.
* Track vendor inventory levels.
Default
You must configure defaults for manufacturing execution production orders to meet the following requirements:
* Ensure accuracy for production order pick list posting.
* Ensure correct pick list creation.
Issues
A. In the current system, the company cannot calculate overhead rates and determine the breakdown of material, labor, machine, and overhead costs for production.
B. The company is manually calculating an 8% overhead on materials and posting a journal manually.
NEW QUESTION # 223
A company produces homeopathic lotions (or pain relief and uses Dynamics 365 Supply Chain Management.
Several components used in the production of the pain-relieving lotion and oils have special government- mandated reporting requirements.
You need to ensure the company can provide the appropriate reporting and tracking for these components.
Which parameters should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 224
......
In order to meet the time requirement of our customers, our experts carefully designed our MB-335 test torrent to help customers pass the exam in a lot less time. If you purchase our MB-335 guide torrent, we can make sure that you just need to spend twenty to thirty hours on preparing for your exam before you take the exam, it will be very easy for you to save your time and energy. So do not hesitate and buy our MB-335 study torrent, we believe it will give you a surprise, and it will not be a dream for you to pass your Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert exam and get your certification in the shortest time.
Accurate MB-335 Test: https://www.bootcamppdf.com/MB-335_exam-dumps.html
P.S. Free 2026 Microsoft MB-335 dumps are available on Google Drive shared by BootcampPDF: https://drive.google.com/open?id=1WvlBwo0luwi7cMb1isYroLStgQSMvX9a