P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by Exams4Collection: https://drive.google.com/open?id=19N7DOF9d2OgA-3NADL6IZxZNou2smlhV
Exams4Collection's EDGE EDGE-Expert exam training materials not only can save your energy and money, but also can save a lot of time for you. Because the things what our materials have done, you might need a few months to achieve. So what you have to do is use the Exams4Collection EDGE EDGE-Expert Exam Training materials. And obtain this certificate for yourself. Exams4Collection will help you to get the knowledge and experience that you need and will provide you with a detailed EDGE EDGE-Expert exam objective. So with it, you will pass the exam.
| Section | Weight | Objectives |
|---|---|---|
| Energy Efficiency | 25% | - HVAC Systems
|
| Software & Methodology | 25% | - Baseline & Proposed Building Models
|
| EDGE System Overview | 15% | - Understanding the EDGE Standard
|
| Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
| Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
>> EDGE EDGE-Expert Test Review <<
With high pass rate of 99% to 100% of our EDGE-Expert training guide, obviously such positive pass rate will establish you confidence as well as strengthen your will to pass your exam. No other vendors can challenge our data in this market. At the same time, by studying with our EDGE-Expert practice materials, you avoid wasting your precious time on randomly looking for the key point information, and being upset about the accuracy when you compare with the information with the exam content. Our EDGE-Expert Training Materials provide a smooth road for you to success.
NEW QUESTION # 16
Which information about local climate is used for EDGE calculations?
Answer: A
Explanation:
The CBCI EDGE curriculum explains that EDGE uses a simplified, quasi-steady-state approach to estimate building energy performance. To keep the method practical and consistent across many countries, EDGE relies on climate datasets that represent typical conditions over longer time steps rather than detailed hour-by- hour weather files used in dynamic simulation tools. In EDGE, the local climate inputs applied in the baseline and improved case calculations are based on monthly climate averages, including outdoor minimum and maximum temperatures, humidity, wind conditions, and solar radiation.
Monthly averages provide an effective balance between accuracy and usability. They capture seasonal variation that strongly influences heating and cooling loads, while avoiding the complexity and data intensity of hourly modeling. Weekly averages are not used because they add complexity without providing the standardized global consistency that EDGE aims for. Annual averages would be too coarse, because they would hide seasonal peaks and understate the impact of envelope and HVAC efficiency measures.
Therefore, the correct statement is that EDGE calculations use monthly average climate information for the key weather parameters listed.
NEW QUESTION # 17
Which of the following protocols should be followed when the project city is not listed in the EDGE App?
Answer: C
Explanation:
The EDGE App relies on location-specific climate data to calculate resource savings, but not all cities are listed. The EDGE User Guide provides guidance for such cases: "If the project city is not listed in the EDGE App, the user should choose the closest city to the project location that is available in the database. If necessary, the user can edit the climate data (e.g., temperature, humidity) to better reflect the project's actual conditions, ensuring accurate calculations" (EDGE User Guide, Section 2.2: Project Setup). Option B, choose the closest city and edit the climate data if necessary, directly matches this protocol. Option A (write to EDGE Certifier and wait) is incorrect, as this is not a required step: "Users are not required to request new cities; they can proceed by selecting the closest city" (EDGE User Guide, Section 2.2: Project Setup). Option C(select any city in the same climate zone globally) is too broad and inaccurate: "Choosing a city from a different region, even in the same climate zone, may lead to incorrect assumptions about local practices and climate" (EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs). Option D (choose the capital city) is also incorrect unless it is the closest: "The capital city should only be selected if it is the nearest available option in the database" (EDGE User Guide, Section 2.2: Project Setup). Thus, the correct protocol is to choose the closest city and edit climate data (Option B).
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 3.2: Climate Data Inputs.
NEW QUESTION # 18
Which of the following wall solar reflectivity indexes would be the most energy efficient in a hot climate?
Answer: B
Explanation:
In hot climates, reducing heat gain through building envelopes is a key strategy for energy efficiency, as emphasized in EDGE's green building design principles. The EDGE User Guide discusses solar reflectivity (measured by the Solar Reflectance Index, SRI) for walls and roofs, stating: "Higher SRI values indicate greater reflectivity, which reduces heat absorption and lowers cooling energy demand in hot climates. For walls in hot climates, an SRI of 0.7 or higher is recommended to maximize energy savings" (EDGE User Guide, Section 3.5: Passive Design Strategies). The options provided are 0.2, 0.3, 0.4, and 0.7. Since 0.7 is the highest SRI value among the choices, it reflects the most solar radiation, thereby reducing the cooling load andimproving energy efficiency in a hot climate, as per EDGE's guidance. Options A, B, and C have lower SRI values and would result in greater heat absorption, increasing energy use for cooling.
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies.
NEW QUESTION # 19
In order for a project to complete the design certification stage requirements, the EDGE Client must do which of the following?
Answer: C
Explanation:
The design certification stage (Preliminary Certification) in EDGE requires specific actions from the Client to ensure the project can be audited and certified. The EDGE Certification Protocol outlines the process: "To complete the design certification stage, the EDGE Client must provide the EDGE Auditor with access to the completed self-assessment in the EDGE software, along with all supporting documentation, such as drawings, specifications, and calculations, to verify the selected measures" (EDGE Certification Protocol, Section 3.1:
Certification Process). Option C, provide the EDGE Auditor access to the self-assessment and all supporting documentation, matches this requirement. Option A (internally review the EDGE measures) is a preparatory step, not a certification requirement: "Internal reviews are recommended but not mandated for certification" (EDGE User Guide, Section 6.1: Project Preparation). Option B (access the EDGE software and complete a self-assessment) is a prerequisite to the audit, not the final step for design certification: "The self-assessment must be completed before the audit, but certification requires submission to the Auditor" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (sign an agreement with a certification partner) is incorrect, as this is typically handled during project registration, not design certification: "Agreements with Certification Providers are signed prior to registration, not at the design stage" (EDGE Certification Protocol, Section 2.1: Registration). Thus, providing the Auditor access (Option C) is the required action.
Reference:EDGE Certification Protocol, Section 3.1: Certification Process, Section 2.1: Registration; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.
NEW QUESTION # 20
Which of the following building types is NOT covered by EDGE?
Answer: B
Explanation:
EDGE certification applies to specific building typologies that align with its focus on resource efficiency in new constructions and major renovations. The EDGE User Guide lists the covered building types: "EDGE certification is available for the following building typologies: homes, hotels, offices, hospitals, retail, schools, warehouses, and light industry buildings. These typologies are selected because they have predictable energy, water, and materials usage patterns that can be modeled in the EDGE software" (EDGE User Guide, Section 1.2: Scope of EDGE Certification). Option A (hospitals), Option B (schools), and Option D (warehouses) are explicitly included in this list, making them eligible for EDGE certification. However, Option C (factories - heavy industry) is not covered, as clarified in the EDGE Certification Protocol: "Heavy industry factories are not covered by EDGE, as their energy and water usage patterns are highly variable and process-driven, making them unsuitable for the standardized modeling approach used in EDGE. Light industry buildings, such as small manufacturing facilities with predictable usage, are included, but heavy industry, such as steel production or chemical manufacturing, is excluded" (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). The EDGE Methodology Report further explains: "Heavy industry factories involve complex industrial processes that dominate resource consumption, which cannot be accurately modeled using EDGE's simplified methodology, unlike hospitals, schools, or warehouses, which have more consistent occupancy and usage patterns" (EDGE Methodology Report Version 2.0, Section 2.1:
Calculation Approach). The EDGE User Guide also notes: "Building types like heavy industry factories are outside the scope of EDGE, as the software is designed for commercial and residential buildings with typical HVAC, lighting, and water demands" (EDGE User Guide, Section 1.2: Scope of EDGE Certification).
Therefore, factories (heavy industry) (Option C) is the building type not covered by EDGE.
Reference:EDGE User Guide Version 2.1, Section 1.2: Scope of EDGE Certification; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard; EDGE Methodology Report Version 2.0, Section 2.1:
Calculation Approach.
NEW QUESTION # 21
......
Before starting the EDGE EDGE-Expert preparation, plan the amount of time you will allot to each topic, determine the topics that demand more effort and prioritize the components that possess more weightage in the EDGE EDGE-Expert Exam. This kind of polished approach is beneficial for a commendable grade in the EDGE EDGE-Expert Exam.
Valid EDGE-Expert Test Pattern: https://www.exams4collection.com/EDGE-Expert-latest-braindumps.html
P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by Exams4Collection: https://drive.google.com/open?id=19N7DOF9d2OgA-3NADL6IZxZNou2smlhV