많은 시간과 돈이 필요 없습니다. 30분이란 특별학습가이드로 여러분은Fortinet NSE6_EDR_AD-7.0인증시험을 한번에 통과할 수 있습니다, ITDumpsKR에서Fortinet NSE6_EDR_AD-7.0시험자료의 문제와 답이 실제시험의 문제와 답과 아주 비슷한 덤프만 제공합니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Policy Management and Security Profiles | 25% | - Exclusion configuration - Default security policies overview - Custom policy creation and modification - Application control rules - Policy assignment and targeting |
| Topic 2: FortiEDR Architecture and Components | 20% | - FortiEDR core architecture overview - Communication Manager and Cloud Console - Collector Agent components and functionality - Management Platform architecture |
| Topic 3: Administration and Maintenance | 10% | - System monitoring and diagnostics - Backup and recovery procedures - Upgrade and patch management - Log management and export - User management and role-based access |
| Topic 4: Threat Detection and Response | 20% | - Event analysis and investigation - Real-time threat blocking - Forensic data collection - Incident response workflows - Automated threat remediation |
| Topic 5: FortiEDR Installation and Configuration | 25% | - Collector Agent installation methods - Initial configuration and licensing - Management Platform deployment - Communication Manager setup - Pre-installation requirements and planning |
>> NSE6_EDR_AD-7.0최신 시험기출문제 <<
ITDumpsKR Fortinet NSE6_EDR_AD-7.0덤프 구매전 혹은 구매후 의문나는 점이 있으시면 한국어로 온라인서비스 혹은 메일로 상담 받으실수 있습니다. 기술 질문들에 관련된 문제들을 해결 하기 위하여 최선을 다 할것입니다. 고객님이 ITDumpsKR Fortinet NSE6_EDR_AD-7.0덤프와 서비스에 만족 할 수 있도록 저희는 계속 개발해 나갈 것입니다.
질문 # 27
What specific action does FortiEDR take when the Zero Trust Device Tagging playbook is activated?
(Choose one answer)
정답：C
질문 # 28
Refer to the exhibit.
Based on the exhibit, which two observations are true? (Choose two answers)
정답：B,D
설명：
The correct answers are C and D .
The exhibit shows the incident classification as Malicious . In the Activity Audit, the entry from FortinetCloudServices states: "Classification change: Malicious" and also says the file is classified as malicious. This directly proves that FCS classified the event as malicious . The FortiEDR guide explains that the audit history shows the chronology for classifying the security event and displays details when FortiEDR Cloud Service (FCS) reclassifies a security event after its initial classification by the Core.
The exhibit also states that the file was "Detected as Unknown malware." This supports option D in the exam wording: FortiEDR/FCS has classified the file as malicious, but it is being identified as unknown malware , meaning it was not recognized as a known malware family/signature at the time of classification.
The guide explains that FCS enhances classification using data enrichment, automated and manual analysis, file analysis, sandboxing, machine learning flow analysis, commonality analysis, crowdsourced data deduction, and other methods, so "unknown malware" can still be classified malicious by FCS.
Option A is wrong because the exhibit shows Malicious , not Suspicious. Option B is wrong because the incident status is Unhandled , not resolved or handled.
=========
질문 # 29
You find third-party software on a user's computer that does not appear in the application list on the communication control console. Which two statements are true about this situation? (Choose two answers)
정답：A,B
설명：
The best answers are A and D , but be careful: A is directly verified by the guide; D is the only remaining statement that can be true in policy context, but it is weaker than A.
The FortiEDR 7.0.0 Administration Guide states that the Communication Control tab identifies communicating applications detected in the organization. More specifically, the Applications page lists "all communicating applications detected in your organization that have ever attempted to communicate." Therefore, if software exists on a user's computer but does not appear in the Communication Control application list, the most direct explanation is that it has not attempted external communication .
The guide also explains that FortiEDR Communication Control reduces the scope of administration because Security/IT only needs to handle applications that communicate externally. It also states that non-authorized applications can still execute, and only their outgoing communication is prevented. This confirms that the Communication Control application list is not a full software inventory; it is a list of applications that have communicated or attempted communication.
Option B is not correct. If an application were blocked due to FortiEDR security-policy enforcement after a connection attempt, FortiEDR would generate security-event visibility in the Incidents workflow, not simply hide the application from Communication Control. FortiEDR Collectors send communication-related data for Communication Control, and security events are sent for enforcement/monitoring purposes.
Option C is also wrong. Reputation score affects policy decisions and application risk evaluation, but it does not cause an application to be ignored or excluded from the application list. The guide says each application in the Applications page shows a reputation indicator, which proves reputation is displayed for listed applications rather than used to hide them.
For option D , if the application has never attempted communication, Communication Control has no observed communication event to list. In exam logic, this can be interpreted as the application is not currently being denied by Communication Control policies. However, the stronger technical truth is this:
Communication Control does not list installed software; it lists applications that have attempted to communicate.
=========
질문 # 30
Refer to the exhibits.
The application policy logs and application details are shown. Collector C8092231196 is a member of the Finance group. In this scenario, what must you do to block the FileZilla application? (Choose one answer)
정답：B
설명：
The correct answer is B. Deny the application in the Finance policy .
The FortiEDR 7.0.0 Administration Guide states that Communication Control policies define the actions to be taken for a given application or application version . It also states that each Communication Control policy applies to specific Collector Groups , and all devices that belong to those Collector Groups follow that policy. A Collector Group can be assigned to only one Communication Control policy.
In the exhibit, the Collector C8092231196 is stated to be a member of the Finance group. Therefore, to block FileZilla for that Collector, the application action must be set to Deny under the Finance policy , because that is the policy context that applies to the Collector's group.
The guide also explains that you can modify a policy action for an application/version so that the selected application is explicitly set to Allow or Deny for the relevant policy. When modified this way, the Application
/Version Details area shows the action as manually changed and excluded from the original policy action.
Option A is wrong because assigning a Simulation Communication Control Policy to the DBA group does not affect a Collector in the Finance group. Option C is wrong because assigning the Finance policy to the DBA group would affect DBA Collectors, not the Finance Collector in the scenario. Option D is wrong because assigning the Finance policy to a broader group such as Default Collector Group is unnecessary and could over-broaden the policy impact. The precise action is to deny FileZilla in the policy that applies to the Collector's own group: Finance policy .
=========
질문 # 31
Refer to the exhibit.
An event exception is shown. Which two statements about the exception are true? (Choose two answers)
정답：A,B
설명：
The correct answers are C and D .
The exhibit shows an exception created/updated by FortinetCloudServices after the file Update.exe was classified as Good . This aligns with the FortiEDR Cloud Service behavior described in the guide. The guide states that once FCS is connected, it can enable Tuning , which means automated security event exception
/allowlisting. After a triggered security event is reclassified as Safe, an automated cross-environment exception can be pushed downstream and the event expires, preventing it from triggering again.
Option C is correct because the Event Exceptions window includes Triggered Rules , and the guide states that when editing an exception, the administrator can modify the Collector Groups , Destinations , Users , and the pairs of rules and processes that define the exception in the Triggered Rules area.
Option D is the Fortinet/FCS-related statement supported by the guide's FCS behavior. The guide says FCS can enable follow-up actions, including Tuning through automated exceptions and Playbook Actions , and that playbook policy remediation actions are based on the final FCS determination.
Option A is wrong because the exhibit explicitly states "All the Raw Data Items are covered." A partial exception would mean not all raw data items are covered. The guide explains that if an exception does not cover all raw data items, FortiEDR displays a different indicator and distinguishes covered from non-covered raw data items.
Option B is wrong because the exception scope in the exhibit is set to All groups , All destinations , and All users . The comment references device C8092231196, but that is not the same as saying the exception applies only to that device.
=========
질문 # 32
......
Fortinet NSE6_EDR_AD-7.0 덤프에 대한 자신감이 어디서 시작된것이냐고 물으신다면Fortinet NSE6_EDR_AD-7.0덤프를 구매하여 시험을 패스한 분들의 희소식에서 온다고 답해드리고 싶습니다. 저희Fortinet NSE6_EDR_AD-7.0덤프는 자주 업데이트되고 오래된 문제는 바로 삭제해버리고 최신 문제들을 추가하여 고객님께 가장 정확한 덤프를 제공해드릴수 있도록 하고 있습니다.
NSE6_EDR_AD-7.0최신버전 시험공부자료: https://www.itdumpskr.com/NSE6_EDR_AD-7.0-exam.html