300-620 Latest Dumps | Simulations 300-620 Pdf

What's more, part of that DumpsQuestion 300-620 dumps now are free: https://drive.google.com/open?id=1W3FG8Z2CdFTutL6RcQSj-P9LnKLvvHI-

DumpsQuestion dumps has high hit rate that will help you to pass Cisco 300-620 test at the first attempt, which is a proven fact. So, the quality of DumpsQuestion practice test is 100% guarantee and DumpsQuestion dumps torrent is the most trusted exam materials. If you won't believe us, you can visit our DumpsQuestion to experience it. And then, I am sure you must choose DumpsQuestion exam dumps.

Cisco 300-620 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: ACI Management	20%	- Configure software upgrade - Implement AAA and RBAC - Implement configuration backup 1. Config import/export 2. Snapshot - Utilize syslog and SNMP services - Implement out-of-band and in-band management
Topic 2: External Network Connectivity	20%	- Implement Layer 2 out 1. STP/MCP basics - Implement Layer 3 out 1. Excludes transit routing and VRF route leaking
Topic 3: Integrations	15%	- Implement VMware vCenter DVS integration - Describe resolution immediacy in VMM - Implement service graph 1. Unmanaged mode 2. Managed mode
Topic 4: ACI Packet Forwarding	15%	- Implement bridge domain configuration 1. Unicast routing 2. ARP flooding 3. Layer 2 unknown hardware proxy - Describe endpoint learning
Topic 5: ACI Fabric Infrastructure	20%	- Describe ACI topology and hardware - Implement ACI policies 1. Fabric policies 2. Access policies - Implement ACI logical constructs 1. VRF 2. Tenant 3. Bridge domain Unicast routing Layer 2 unknown hardware proxy ARP flooding 4. Endpoint groups (EPG) 5. Application profile 6. Contracts Filter Provider / Consumer Reverse port filter VRF enforced - Describe ACI Object Model - Describe ACI fabric discovery - Utilize faults, event record, and audit log
Topic 6: ACI Anywhere	10%	- Describe multisite architecture - Describe multipod architecture

>> 300-620 Latest Dumps <<

Simulations Cisco 300-620 Pdf & Valid Exam 300-620 Registration

If you are the first time to prepare the 300-620 exam, it is better to choose a type of good study materials. After all, you cannot understand the test syllabus in the whole round. It is important to predicate the tendency of the 300-620 study materials if you want to easily pass the exam. Now, all complicate tasks have been done by our experts. They have rich experience in predicating the 300-620 exam. Then you are advised to purchase the study materials on our websites. Also, you can begin to prepare the 300-620 Exam. You are advised to finish all exercises of our 300-620 study materials. In fact, you do not need other reference books. Our study materials will offer you the most professional guidance. In addition, our 300-620 study materials will be updated according to the newest test syllabus. So you can completely rely on our 300-620 study materials to pass the exam.

Cisco Implementing Cisco Application Centric Infrastructure Sample Questions (Q68-Q73):

NEW QUESTION # 68
Refer to the exhibit A customer must back up the current Cisco ACl configuration securely to the remote location using encryption and authentication. The backup job must run once per day The customer s security policy mandates that any sensitive information including passwords, must not be exported from the device Which set of steps meets these requirements?

A. Option C
B. Option D
C. Option A
D. Option B

Answer: D

NEW QUESTION # 69
Refer to the exhibit.

Refer to the exhibit. An engineer configures a Layer 4 to Layer 7 device object. The device is a virtual firewall with a single network adapter and it must be deployed in routed mode. Which .. completes the configuration of the device object?

A. Change context awareness to Multiple.
B. Change Function Type to GoTo.
C. Enable Promiscuous Mode.
D. Add an outside interface to the cluster interfaces.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/dcn/aci/apic/6x/l4-l7-configuration/cisco-apic-layer-4-to-layer-7-services-deployment-guide-60x/defining-a-logical-device-60x.html

NEW QUESTION # 70
The Application team reports that a previously existing port group has disappeared from vCenter. An engineer confirms that the VM domain association for the EPG is no longer present. Which action determines which user is responsible for the change?

A. Examine the health score and drill down to an object that affects the EPG combined score.
B. Evaluate the potential faults that are raised for that EPG.
C. Inspect the server logs to see who was logging in to the APIC during the last few hours.
D. Check the EPG audit logs for the 'deletion' action and compare the affected object and user.

Answer: D

Explanation:
To determine which user is responsible for the disappearance of a previously existing port group from vCenter, the engineer should check the EPG audit logs for any 'deletion' actions. By comparing the affected object and the user who performed the action, the engineer can identify the responsible individual2.

NEW QUESTION # 71
An engineer must attach an ESXi host to the Cisco ACI fabric. The host is connected to Leaf 1 and has its gateway IP address 10.10.10.254/24 configured inside the ACI fabric. A new firewall is attached to Leaf 2 and mapped to the same EPG and BD as the ESXi host. The engineer must migrate the gateway of the ESXi host to the firewall. Which configuration set accomplishes this goal?

A. Enable unicast routing.
Set IP address 10.10.10.254/24 on the firewall.
B. Disable unicast routing.
Configure IP address 10.10.10.254/24 on the ACI BD.
C. Enable unicast routing.
Configure IP address 10.10.10.254/24 on the ACI EPG.
D. Disable unicast routing.
Define IP address 10.10.10.254/24 on the firewall.

Answer: D

Explanation:
When ACI Bridge Domain has unicast routing enabled, the gateway IP is served by ACI (Anycast Gateway), which distributes the IP to all relevant leaf switches.
To migrate the gateway to an external device (the firewall), unicast routing in the ACI BD must be disabled, preventing ACI from advertising or responding on that gateway IP.
The firewall will take over as the default gateway by configuring the gateway IP address on it, and all endpoints will use the firewall as their next hop.
This approach allows ARP and Layer 2 traffic to flow through the ACI fabric, but all routing (Layer
3) occurs on the external firewall.

NEW QUESTION # 72
An engineer wants to monitor all configuration changes, threshold crossing, and link-state transitions in a Cisco ACI fabric. Which action must be taken to receive the required messages?

A. Include Audit Logs and Events in the Syslog source policy.
B. Add Session Logs and Audit Logs to the monitor policy.
C. Include Events and Session Logs in the Syslog source policy.
D. Add Faults and Events to the monitor policy.

Answer: B

Explanation:
After searching, there is nothing called "syslog source policy" in ACI. Syslog source policy exists in UCS Central. The choices now are on "Monitoring Policy" that exits on A and C.
https://community.cisco.com/legacyfs/online/attachments/blog/technote-aci-syslog_external-latest.pdf
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/faults/guide/b_APIC_Faults_Errors/b_IFC_Faults_Errors_chapter_010.html

NEW QUESTION # 73
......

300-620 pdf dumps carry real Implementing Cisco Application Centric Infrastructure (300-620) exam questions which are printable. It means candidates can take printed actual questions to any place. Furthermore, the Implementing Cisco Application Centric Infrastructure (300-620) PDF dumps format is also portable. Therefore, you can access this valid Cisco 300-620 questions PDF document on tablets, smartphones, and laptops.

Simulations 300-620 Pdf: https://www.dumpsquestion.com/300-620-exam-dumps-collection.html

P.S. Free & New 300-620 dumps are available on Google Drive shared by DumpsQuestion: https://drive.google.com/open?id=1W3FG8Z2CdFTutL6RcQSj-P9LnKLvvHI-