Außerdem sind jetzt einige Teile dieser ZertFragen HPE7-A01 Prüfungsfragen kostenlos erhältlich: https://drive.google.com/open?id=1n9pZ-9LxWiBGKurF-HQMv4FkYLs8yBNt
ZertFragen zusammengestellt HP ZertFragen HPE7-A01 mit Original-Prüfungsfragen und präzise Antworten, wie sie in der eigentlichen Prüfung erscheinen. Eine der Tatsachen Sicherstellung einer hohen Qualität der Aruba Certified Campus Access Professional Exam-Prüfung ist die ständig und regelmäßig zu aktualisieren. ZertFragen ernennt nur die besten und kompetentesten Autoren für ihre Produkte und die Prüfung ZertFragen HPE7-A01 zum Zeitpunkt des Kaufs ist absoluter Erfolg.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: WLAN Technologies | 17% | - Wireless LAN Implementation
|
| Topic 2: Network Fundamentals | 4% | - Network Stack
|
| Topic 3: Security | 9% | - Network Security
|
| Topic 4: Switching & Layer 2/3 Technologies | 14% | - Campus Switching
|
| Topic 5: Routing | 13% | - Routing Implementation
|
| Topic 6: Authentication & Authorization | 8% | - AAA Configuration
|
| Topic 7: Monitoring & Management | 6% | - Network Monitoring Tools
|
| Topic 8: Troubleshooting | 6% | - Wired and Wireless Troubleshooting
|
| Topic 9: Network Connectivity & Architecture | 8% | - Connectivity
|
| Topic 10: Performance Optimization | 7% | - QoS and Optimization
|
Die Konkurrenz in unserer Gesellschaft wird immer heftiger. Unsere ZertFragen ist noch bei vielen Prüfungskandidaten sehr beliebt, weil wir immer vom Standpunkt der Teilnehmer die Softwaren entwickeln. Z.B. die gut gekaufte HP HPE7-A01 Prüfungssofteware wird von unserem professionellem Team entwickelt mit großer Menge Forschung der HP HPE7-A01 Prüfung. Obwohl wir eine volle Rückerstattung für die Verlust des Tests versprechen, bestehen fast alle Kunde HP HPE7-A01, die unsere Produkte benutzen. Was beweist die Vertrauenswürdigkeit und die Effizienz unserer HP HPE7-A01 Prüfungsunterlagen.
111. Frage
Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device.
The following configuration was created on the switch:
Antwort: A
Begründung:
The correct configuration for OSPF adjacency over SVI 10 with LAG 1 to a neighboring device is shown in Option C.
The configuration includes the following steps:
* Create a VLAN 10 and assign it a name and an IP address.
* Create a LAG 1 and assign it a name and a mode of dynamic or static.
* Add member ports to LAG 1 and enable the LAG interface.
* Assign VLAN 10 as the untagged VLAN for LAG 1.
* Enable OSPF on the switch and assign it a router ID.
* Create an OSPF area 0 and add SVI 10 as an interface in that area.
Option A is incorrect because it does not enable OSPF on the switch or create an OSPF area.
Option B is incorrect because it assigns VLAN 10 as the tagged VLAN for LAG 1, which is not compatible with SVI 10.
Option D is incorrect because it does not add member ports to LAG 1 or enable the LAG interface.
112. Frage
Which feature supported by SNMPv3 provides an advantage over SNMPv2c?
Antwort: D
Begründung:
Explanation
Encryption is a feature supported by SNMPv3 that provides an advantage over SNMPv2c. Encryption protects the confidentiality and integrity of SNMP messages by encrypting them with a secret key. SNMPv2c does not support encryption and relies on community strings for authentication and authorization, which are transmitted in clear text and can be easily intercepted or spoofed. Transport mapping, community strings, and GetBulk are features that are common to both SNMPv2c and SNMPv3. References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/snmp/snmp.htm
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/snmp/snmpv3.htm
113. Frage
You are doing tests in your lab and with the following equipment specifications:
* AP1 has a radio that generates a 10 dBm signal
* AP2 has a radio that generates a 11 dBm signal
* AP1 has an antenna with a gain of 9 dBi
* AP2 has an antenna with a gain of 12 dBi
* The antenna cable for AP1 has a 2 dB loss
* The antenna cable for AP2 has a 3 dB loss
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for APT?
Antwort: B
Begründung:
The calculated Equivalent Isotropic Radiated Power (EIRP) for AP1 is 30 dBm. EIRP is the product of the transmitter power (in dBm) and the antenna gain (in dBi) minus the cable loss (in dB). For AP1, EIRP = 10 dBm + 9 dBi -2 dB = 17 dBm. For AP2, EIRP = 11 dBm + 12 dBi -3 dB =
20 dBm.
114. Frage
you need to have different routing-table requirements With Aruba CX 6300 VSF configuration.
Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?
Antwort: D
Begründung:
The correct answer is C. Create a new SVI and use attach command.
To create a new SVI for a separate routing table, you need to use the attach command to associate the SVI with a VRF (Virtual Routing and Forwarding) instance. A VRF is a logical entity that allows multiple routing tables to coexist on the same switch. Each VRF has its own set of interfaces, routing protocols, and routes that are isolated from other VRFs.
According to the AOS-CX Virtual Switching Framework (VSF) Guide1, one of the steps to configure VRF-aware VSF is:
Configure the VRFs on each member switch and assign the SVIs to the respective VRFs using the attach command. For example:
switch(config)# vrf red
switch(config-vrf)# exit
switch(config)# interface vlan 10
switch(config-if-vlan)# ip address 10.1.1.1/24
switch(config-if-vlan)# attach vrf red
The above commands create a VRF named red and assign VLAN 10 SVI to it. The SVI has an IP address of 10.1.1.1/24.
The other options are incorrect because:
A) You cannot attach a VRF to a VLAN directly. You need to create an SVI for the VLAN and then attach the VRF to the SVI.
B) You cannot create a new routing table manually. You need to create a VRF and then use routing protocols or static routes to populate the routing table for the VRF.
D) You cannot attach a routing table to a VLAN directly. You need to create an SVI for the VLAN and then attach a VRF that has a routing table associated with it.
115. Frage
Due to a shipping error, five (5) Aruba AP-515S and one (1) Aruba CX 6300 were sent directly to your new branch office You have configured a new group persona for the new branch office devices in Central, but you do not know their MAC addresses or serial numbers The office manager is instructed via text message on their smartphone to onboard all the new hardware into Aruba Central What application must the office manager use on their phone to complete this task?
Antwort: D
Begründung:
Aruba Installer App is a mobile app that simplifies site installations and enables network connectivity for Aruba devices. The app allows the user to scan the barcode of the device and add it to the network using Aruba Central. The app also automates importing Aruba devices into Aruba NetEdit for intelligent configuration management and continuous conformance validation
116. Frage
......
Fühlen Sie sich sehr schwierig, erfolgreich zu werden? Fühlen Sie es sehr schwierig, IT-Zertifizierungsprüfungen zu bestehen? Sorgen Sie sich jetzt um die HP HPE7-A01 Zertifizierungsprüfung? Es ist unnötig. IT-Zertifizierungsprüfungen sind nicht so geheimnisvoll wie Sie glauben. Wir können richtige Geräte benutzen, erfolgreich zu werden. Solange Sie die richtigen Geräte wählen, ist es sehr einfach erfolgreich zu werden. Wissen Sie, was ist das beste Gerät? Ja, HP HPE7-A01 Dumps von ZertFragen sind die besten Geräte. Diese Dumps sammeln und analysieren viele vorherige HPE7-A01 Prüfungsfragen. Und sie fügen auch viele neue Prüfungsfragen laut der Prüfungsvorschriften hinzu. Das ist die Dumps, die Sie HP HPE7-A01 Prüfung einmalig bestehen können.
HPE7-A01 Deutsche: https://www.zertfragen.com/HPE7-A01_prufung.html
Übrigens, Sie können die vollständige Version der ZertFragen HPE7-A01 Prüfungsfragen aus dem Cloud-Speicher herunterladen: https://drive.google.com/open?id=1n9pZ-9LxWiBGKurF-HQMv4FkYLs8yBNt