What's more, part of that PDFBraindumps NSEI_OTS_AR-7.6 dumps now are free: https://drive.google.com/open?id=1RGXjhgQqvcD91ESoSE9jkByjaRqkhth0
Dear, hurry up to get the 100% pass NSEI_OTS_AR-7.6 exam study dumps for your preparation. You will get original questions and verified answers for the Fortinet certification. After purchase of the NSEI_OTS_AR-7.6 exam dumps, you can instant download the NSEI_OTS_AR-7.6 practice torrent and start your study with no time wasted. The validity and useful NSEI_OTS_AR-7.6 will clear your doubts which will be in the actual test. When you prepare well with our NSEI_OTS_AR-7.6 pdf cram, the 100% pass will be easy thing.
| Section | Objectives |
|---|---|
| Topic 1: Asset management | - Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC - Explain OT standard and Fortinet compliance |
| Topic 2: Monitoring and risk assessment | - Analyze security reports from FortiAnalyzer - Perform risk assessment and management - Create FortiAnalyzer event handlers |
| Topic 3: Network security | - Configure security inspections for industrial protocols - Configure virtual patching - Configure automation |
| Topic 4: Network access control | - Configure network access authentication - Configure network segmentation schemas - Explain OT Ethernet concepts |
>> New NSEI_OTS_AR-7.6 Test Materials <<
If you are busying with your study or work and have little time to prepare for your exam, choose us, we will do the rest for you. NSEI_OTS_AR-7.6 exam bootcamp are edited and verified by professional experts, therefore the quality and accuracy can be guaranteed. You just need to spend about 48 to 72 hours on practicing, and you can pass the exam in your first attempt by using NSEI_OTS_AR-7.6 Exam Braindumps of us. We offer you free demo to have a try before buying. Online and offline chat service are available, and if you have any questions about NSEI_OTS_AR-7.6 exam bootcamp, you can have a conversation with us.
NEW QUESTION # 24
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and C .
Option C is correct because the profile clearly contains the Operational Technology category and specific OT application signatures such as Modbus and IEC.60870.5.104 . The study guide says "You can use application control signatures to detect OT protocols" and "You can filter to a specific OT protocol." That means OT application signatures are active in this sensor profile.
Option A is correct because the guide explains that application control works at different levels: "Detection of protocol (one detection per session)" and "Message level (one detection per protocol message)." It also says you can use application signatures for "granular message type identification." In the exhibit, IEC.
60870.5.104.Control.Functions is explicitly configured, which is a granular IEC message/control-level signature rather than only a protocol-level match. That means logging and control can occur at the IEC command level.
Option B is not correct because the profile shows Modbus configured at the parent protocol level as Monitor
, while the guide states that the "parent signature takes precedence over the child signature." Since protocol-level detection is one detection per session , that does not mean FortiGate will necessarily log each Modbus command individually.
Option D is incorrect because even though the broader Operational Technology category is set to block, the profile includes specific application and filter overrides for Modbus and IEC 104 behavior. So the resulting effect is not simply that all OT protocols are blocked .
NEW QUESTION # 25
Refer to the exhibit.
Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer: C
Explanation:
Based on the OT Security 7.6 Architect study guide regarding the Asset Identity Center and Asset Management :
* Vulnerability Visibility : The Asset Identity List tab displays key metadata for IT and OT devices, including detected addresses, users, and a specific column for Vulnerabilities .
* Virtual Patching Feature : In the OT Security 7.6 architecture, the " Vulnerabilities " column is populated through the OT Security Service license, which includes " OT vulnerability correlation definitions & virtual patching signatures " .
* Correlation Mechanism : FortiGate extracts metadata from OT traffic and uses these signatures to identify known vulnerabilities on the assets. For these vulnerabilities to be identified and correlated in the Asset Identity Center as shown in the exhibit (displaying a count of 8 vulnerabilities), the Virtual Patching feature must be active.
* Architectural Implementation : Virtual patching is a critical component of the " Protection " layer in OT networks, allowing administrators to secure legacy or unpatchable PLCs and RTUs by blocking exploit attempts at the network level using IPS-based virtual patching signatures.
* Exhibit Analysis : The presence of identified vulnerabilities (the number " 8 " in the red shield) in the Asset Identity List confirms that the FortiGate is actively performing vulnerability correlation, which is the operational result of having a Virtual Patching security profile applied to the relevant firewall policy.
NEW QUESTION # 26
Refer to the exhibit.
A partial Incident Analysis page is shown. How was the 360-Degree Security Review OT report attached to the incident? (Choose one answer)
Answer: C
Explanation:
The study guide says playbooks are used to automate tasks such as running reports and creating/updating incidents . It also says that after a playbook is triggered, it flows through its configured tasks.
It further shows a sample playbook sequence where an event is detected, an incident is created , a report runs , and details are attached to the incident . That is exactly the kind of workflow shown in the incident analysis view.
By contrast, the study guide says event handlers generate events when logs match configured rules. Event handlers are for detection, not for attaching reports to incidents.
NEW QUESTION # 27
Refer to the exhibit.
A basic event handler is shown. You have enabled Automation Stitch to automate the handling of an alert.
Which two steps must you take to use this automation stitch? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are C and D .
Option D is correct because the study guide states that the configuration of an event handler can include
"Rules" and explains that "Rules are granular conditions" and "Event handlers can have one or more rules." It further states that "FortiAnalyzer uses event handlers to filter all incoming logs" and "If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Therefore, to use the automation stitch, you must define the rules on FortiAnalyzer so the event handler can actually generate the event that starts the automation flow.
Option C is also correct. The study guide explains that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to the FortiGate side, and in the attack-detection example it says "FortiAnalyzer parses the logs and notifies the root FortiGate" and then
"The root FortiGate triggers the action." It also explicitly shows "Stitches configured on root FortiGate." This means the FortiGate must have the corresponding automation trigger configured for the FortiAnalyzer event handler notification.
Option A is incorrect because the study guide does not describe configuring an Action on FortiAnalyzer as the required step for this FortiAnalyzer-to-FortiGate automation-stitch flow. Option B is also incorrect because playbooks are a different FortiAnalyzer automation mechanism; the question specifically refers to using the Automation Stitch option in the event handler.
NEW QUESTION # 28
Refer to the exhibit.
The configuration of firewall policies is shown.
To improve the security of your OT network, you have configured authentication in the firewall policies as shown in the exhibit, with CLI parameters set to their default settings. However, when you test HTTPS access from the LAN subnet to PLC-1, it is successful without any authentication prompt.
What is the reason?
Answer: C
Explanation:
The correct answer is A . Policy ID 8 contains the Supervisors user group, so authentication is required for traffic matching that policy. However, policy ID 9 permits traffic to PLC-1 without a user or user-group authentication requirement. Fortinet explains that when an authentication policy is followed by a fall-through policy that does not require authentication , traffic can match the fall-through policy and proceed without generating a login prompt. This is particularly relevant because the default CLI setting is auth-on-demand implicitly. Under the default implicitly behavior, FortiGate does not trigger active authentication when a matching unauthenticated fall-through policy exists. Setting auth-on-demand always, or requiring authentication on all potentially matching policies, changes that behavior. Therefore, HTTPS succeeds without prompting because authentication was not configured on firewall policy ID 9 .
NEW QUESTION # 29
......
The NSEI_OTS_AR-7.6 desktop practice exam software and NSEI_OTS_AR-7.6 web-based practice test is very beneficial for the applicants in their preparation because these Fortinet NSEI_OTS_AR-7.6 practice exam provides them with the Fortinet NSEI_OTS_AR-7.6 Actual Test environment. PDFBraindumps offers Fortinet NSEI_OTS_AR-7.6 practice tests that are customizable. It means takers can change durations and questions as per their learning needs.
New NSEI_OTS_AR-7.6 Test Blueprint: https://www.pdfbraindumps.com/NSEI_OTS_AR-7.6_valid-braindumps.html
2026 Latest PDFBraindumps NSEI_OTS_AR-7.6 PDF Dumps and NSEI_OTS_AR-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1RGXjhgQqvcD91ESoSE9jkByjaRqkhth0