JN0-364 Latest Braindumps Ppt & Reliable JN0-364 Test Cost

What's more, part of that Lead1Pass JN0-364 dumps now are free: https://drive.google.com/open?id=1gI5TYULWrio7SqSNKefAYIo69J39lTjJ

We believe that if you trust our JN0-364 exam simulator and we will help you obtain JN0-364 certification easily. After purchasing, you can receive our JN0-364 training material and download within 10 minutes. Besides, we provide one year free updates of our JN0-364 learning guide for you and money back guaranteed policy so that we are sure that it will give you free-shopping experience. Now choose our JN0-364 practic braindump, you will not regret.

Juniper JN0-364 Exam Syllabus Topics:

Section	Weight	Objectives
Multiprotocol Label Switching (MPLS)	12-18%	- Labels and LIB - Configuration and monitoring - Segment routing basics - Terminology and forwarding - LDP and RSVP
Tunnels	5-8%	- GRE and IP-IP tunnels - Tunnel configuration and usage
Spanning Tree Protocols	8-12%	- STP, RSTP, MSTP, VSTP - Configuration and convergence - Port roles and states - BPDU and protection features
Protocol-Independent Routing	10-15%	- Static, aggregate, and generated routes - Martian addresses - Routing instances and RIB groups - Load balancing - Filter-based forwarding
Open Shortest Path First (OSPF)	15-20%	- Link-state database - Configuration and troubleshooting - Areas and router types - LSA types and operation
Border Gateway Protocol (BGP)	20-25%	- Policy and route filtering - Configuration and troubleshooting - Path selection and attributes - Basic operation and message types - IBGP and EBGP
Layer 2 Bridging and VLANs	8-12%	- Service provider switching features - Bridging concepts - VLANs and trunking
IPv6	8-12%	- Static and dynamic routing - OSPFv3 and BGP for IPv6 - Autoconfiguration - Address types and format
High Availability	5-8%	- Nonstop active routing - NSR and GRES concepts - Graceful restart
Intermediate System to Intermediate System (IS-IS)	10-15%	- Metrics and wide metrics - Configuration and monitoring - Adjacencies and levels - PDUs and TLVs

>> JN0-364 Latest Braindumps Ppt <<

JN0-364 Latest Braindumps Ppt Offer You The Best Reliable Test Cost to pass Service Provider Routing and Switching, Specialist (JNCIS-SP) exam

To those time-sensitive exam candidates, our high-efficient JN0-364 actual dumps comprised of important news will be best help. Only by practicing our JN0-364 learning guide on a regular base, you will see clear progress happened on you. Besides, rather than waiting for the gain of our JN0-364 Practice Engine, you can download them immediately after paying for it, so just begin your journey toward success now.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q70-Q75):

NEW QUESTION # 70
Click the Exhibit button. You have configured IPv4 and IPv6 in your network and all OSPF neighbors are established. You apply the configuration shown in the exhibit.
Which statement is true in this scenario?

A. There will only be an OSPFv3 entry in R1 for network 172.16.2.0/24.
B. There will only be an OSPFv2 entry in R1 for network 172.16.2.0/24.
C. There will not be a route in R1 for network 172.16.2.0/24.
D. There will be an OSPFv2 and OSPFv3 entry in R1 for network 172.16.2.0/24.

Answer: D

Explanation:
The network is being advertised into OSPFv2 because the LAN-facing interface is enabled under OSPF. It is also being advertised into OSPFv3 for IPv4 because OSPFv3 is configured with the ipv4-unicast realm on the same interface. As a result, R1 learns 172.16.2.0/24 through both protocol instances and will have both protocol entries for that prefix.

NEW QUESTION # 71
Click the Exhibit button.

You have configured an MPLS LSP to 192.168.100.3. However, the LSP is in the down state.
Referring to the exhibit, which two actions would solve this problem? (Choose two.)

A. Issue the set protocols ospf traffic-engineeringcommand and commit.
B. Issue the set protocols mpls label-switched-path to-r3 no-cspfcommand and commit.
C. Issue the set routing-options rib inet.3 static route 192.168.100.1command and commit.
D. Issue the set interfaces lo0 family mplscommand on router R1 and commit.

Answer: A,B

Explanation:
The LSP is using CSPF and the output indicates CSPF cannot build a path because the traffic- engineering database is not available. Enabling OSPF traffic-engineering allows the router to populate the TE database used by CSPF. Alternatively, disabling CSPF forces the LSP to be computed using the normal IGP shortest path, which removes the dependency on the TE database and allows the LSP to come up.

NEW QUESTION # 72
You are configuring BGP on a Juniper router to peer with an external provider. After committing the configuration, the BGP session remains in the Idle state.
Which configuration issue would prevent the BGP session from progressing beyond the Idle state?

A. The peer is configured with a different router ID.
B. The peer IP address is unreachable
C. The BGP group type is set to internal instead of external.
D. The local AS number is higher than the peer's AS number.

Answer: B

Explanation:
The Idle state means the router has not successfully initiated a TCP connection to the BGP peer.
If the peer IP address is unreachable, the router cannot establish the required TCP session on port 179, so the BGP process remains in the Idle state and does not progress to the Connect or Active states.

NEW QUESTION # 73
Which two events cause a static route to be removed from a routing table? (Choose two.)

A. The route is manually removed.
B. The outbound interface becomes unavailable.
C. Hosts two hops away become unreachable.
D. The route has no traffic for 30 days.

Answer: A,B

Explanation:
If the outbound interface associated with a static route becomes unavailable, the router removes the route from the routing table because the next-hop path is no longer reachable.
A static route is also removed when it is manually deleted from the configuration, after which the router withdraws it from the routing table.

NEW QUESTION # 74
Which two statements are correct about the behavior of IS-IS metrics? (Choose two.)

A. By default, all physical interfaces have a metric of 10.
B. By default, the metric of an interface is calculated based on the speed of the interface.
C. Wide metrics enable an interface to advertise different metrics at Level 1 and Level 2.
D. Wide metrics enable interfaces to advertise metrics larger than 63.

Answer: C,D

Explanation:
Wide metrics in IS-IS allow for a larger metric value than what is available with narrow metrics, which supports a maximum of 63. Wide metrics also enable an interface to advertise different metrics for Level 1 and Level 2, allowing for more flexible routing policies and greater scalability in large networks.

NEW QUESTION # 75
......

In addition to the Juniper JN0-364 PDF questions, we offer desktop Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) practice exam software and web-based Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) practice test to help applicants prepare successfully for the actual Building Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam. These Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) practice exams simulate the actual JN0-364 exam conditions and provide an accurate assessment of test preparation.

Reliable JN0-364 Test Cost: https://www.lead1pass.com/Juniper/JN0-364-practice-exam-dumps.html

BTW, DOWNLOAD part of Lead1Pass JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1gI5TYULWrio7SqSNKefAYIo69J39lTjJ