Pass-Sure 100% Free JN0-364–100% Free Valid Exam Voucher | JN0-364 Dump Collection

P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by VCE4Plus: https://drive.google.com/open?id=1vpQSgqxvgpzh9dM3o0xfeXGO8ORxlpuN

For candidates who will buy JN0-364 exam cram online, they may pay much attention to privacy protection. If you choose us, your personal information such as your name and email address will be protected well. After your payment for JN0-364 exam cram, your personal information will be concealed. Besides, we won’t send junk mail to you. We offer you free demo for JN0-364 Exam Dumps before buying, so that you can have a deeper understanding of what you are going to buy.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
IPv6- Identify the concepts, operation, or functionality of IPv6
  • 1. Dynamic routing - OSPFv3, IS-IS, BGP
  • 2. Static routes
  • 3. IPv6 over IPv4 tunneling
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
Protocol-Independent Routing- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 2. Martian addresses
  • 3. Filter-based forwarding
  • 4. Static, aggregate, and generated routes
  • 5. Load balancing
- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Filter-based forwarding
  • 2. Static, aggregate, and generated routes
  • 3. Load balancing
Layer 2 Bridging or VLANs- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. VLANs
  • 2. Interfaces and ports
  • 3. Provider bridging
  • 4. IRB
- Identify the concepts, benefits, or functionality of VLANs
  • 1. Integrated Routing and Bridging (IRB)
  • 2. Port modes
  • 3. Tagging
- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Service provider switching platforms
  • 2. Virtual Switches
  • 3. Frame processing
  • 4. Bridging elements and terminology
  • 5. Provider bridging (Q-in-Q tunneling)
Spanning Tree Protocols- Identify the concepts, operation, or functionality of STP
  • 1. STP
  • 2. MSTP
  • 3. RSTP
  • 4. VSTP
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. STP
  • 2. MSTP
  • 3. RSTP
  • 4. VSTP
Multiprotocol Label Switching (MPLS)- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. LDP
  • 2. MPLS and routing tables
  • 3. MPLS terminology
  • 4. Segment routing with MPLS
  • 5. End-to-end packet flow and forwarding
  • 6. RSVP
  • 7. MPLS packet header
  • 8. Labels and the label information base
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. RSVP-signaled Label-Switched Paths (LSPs)
  • 2. Shortest path segment-routing LSPs
  • 3. LDP-signaled Label-Switched Paths (LSPs)
  • 4. MPLS forwarding
Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. Adjacencies and neighbors
  • 2. Designated router and backup designated router
  • 3. Link-state database
  • 4. Link-state advertisement (LSA) packet type
  • 5. OSPF packet types
  • 6. OSPF area and router types
  • 7. Router ID
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Interfaces and neighbor
  • 2. Troubleshooting tools
  • 3. Routing policy application
Border Gateway Protocol (BGP)- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Troubleshooting tools
  • 2. Peers and peer groups
  • 3. Routing policy application
- Identify the concepts, operation, or functionality of BGP
  • 1. BGP route reflection and confederations
  • 2. Route selection process
  • 3. Attributes
  • 4. BGP basic operation
  • 5. BGP message types
  • 6. IBGP and EBGP functionality and interaction
Intermediate System to Intermediate System (IS-IS)- Identify the concepts, operation, or functionality of IS-IS
  • 1. Type, length, values (TLVs)
  • 2. Metrics
  • 3. Adjacencies and neighbors
  • 4. Levels and areas
  • 5. Link-state database
  • 6. Designated intermediate system (DIS)
  • 7. IS-IS protocol data units (PDUs)
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Troubleshooting tools
  • 2. Interfaces and adjacencies
  • 3. Routing policy application

>> Valid JN0-364 Exam Voucher <<

100% Pass Quiz 2026 Juniper Efficient Valid JN0-364 Exam Voucher

Our JN0-364 practice test material aligns with the content of the actual Juniper JN0-364 certification exam. Before making a purchase, you can test the features of our JN0-364 Exam Questions with a free demo. By utilizing updated JN0-364 Questions, you can easily pass the JN0-364 exam on your first attempt. VCE4Plus has developed its JN0-364 exam study material based on feedback from thousands of professionals worldwide.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q124-Q129):

NEW QUESTION # 124
You are troubleshooting two OSPF routers that have an adjacency that remains in the ExStart state. What would cause this problem?

Answer: D

Explanation:
The problem occurs most frequently when you attempt to run OSPF between a Cisco router and another vendor router. The problem occurs when the maximum transmission unit (MTU) settings for neighboring router interfaces do not match. If the router with the higher MTU sends a packet larger that the MTU set on the neighboring router, the neighbor router ignores the packet.
A mismatched Maximum Transmission Unit (MTU) setting on OSPF interfaces can cause routers to get stuck in the ExStart state. OSPF requires that both sides of a link have the same MTU to form a full adjacency.


NEW QUESTION # 125
Which IPv6 address type is used as an identifier for a group of IPv6 interfaces that might belong to different nodes, typically, the nearest node?

Answer: C


NEW QUESTION # 126
Exhibit:
user@Router-1> show route 172.24/16
inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
...
172.24.0.0/24 *[OSPF/150] 01:31:31, metric 0, tag 0
> to 172.20.0.2 via ge-0/0/2.0
to 172.20.1.2 via ge-0/0/3.0
user@Router-1> show route forwarding-table
Routing table: default.inet
Internet:
Destination Type RtRef Next hop Type Index NhRef Netif
...
172.24.0.0/24 user 0
172.20.0.2 ucst 551 2 ge-0/0/2.0
172.20.1.2 ucst 552 2 ge-0/0/3.0
Referring to the exhibit, which two statements are true? (Choose two.)

Answer: A,C

Explanation:
In Junos OS, understanding the distinction between theRouting Information Base (RIB)and theForwarding Information Base (FIB)is fundamental to analyzing traffic patterns and load-balancing behavior. The RIB (show route) contains all prefixes learned via various protocols, while the FIB (show route forwarding-table) contains only the active next-hops that are actually programmed into the Packet Forwarding Engine (PFE).
According to Juniper Networks technical documentation, the default behavior for Junos OS when encounteringEqual-Cost Multipath (ECMP)routes is to select only a single next-hop from the available candidates in the RIB and install that single path into the FIB. In a default state, even if the show route output displays multiple next-hops for a destination like 172.24.0.0/24, only one would have the active route symbol (
>) and only that one would appear in the forwarding table.
In the provided exhibit, the show route output shows two next-hops for 172.24.0.0/24, but only the first one (172.20.0.2) is marked with the>symbol as the active selection. However, the subsequent show route forwarding-table output reveals thatboth next-hops(172.20.0.2 and 172.20.1.2) are currently present in the forwarding table for that same destination. This discrepancy indicates that thedefault load-balancing behavior has been modified (Option B). This modification is typically achieved by creating a routing policy with the action then load-balance per-packet (which actually results in flow-based load balancing) and applying it to the forwarding table via the export statement under [edit routing-options forwarding-table].
Because the forwarding table now contains both next-hops, the router is no longer restricted to a single path.
Therefore, therouter will choose both next-hops in the routing table (Option D)for packet forwarding, distributing flows across the two available Gigabit Ethernet interfaces (ge-0/0/2.0 and ge-0/0/3.0). This ensures higher utilized bandwidth and provides redundancy at the data plane level.


NEW QUESTION # 127
You are asked to configure a new network environment that will be based on IPv6 and use OSPF. In this scenario, which two statements correctly identify configuration task considerations? (Choose two.)

Answer: A,C

Explanation:
When transitioning to an IPv6 environment usingOSPFv3(the version of OSPF designed for IPv6), there are significant architectural differences compared to OSPFv2 (IPv4). According to Juniper Networks technical documentation, OSPFv3 was redesigned to be more protocol-agnostic.
Router ID (Option C):
Despite OSPFv3 routing IPv6 (which uses 128-bit addresses), the OSPFRouter IDremains a32-bit value formatted like an IPv4 address (e.g., 1.1.1.1). This is a common point of confusion. In a pure IPv6 environment where no IPv4 addresses are configured on any interfaces, a Juniper router cannot automatically derive a Router ID. Therefore, the administrator must manually configure a 32-bit Router ID under [edit routing-options] for the OSPFv3 process to initialize.
Interface Configuration (Option D):
OSPFv3 runs directly over the IPv6 link-local scope. Unlike OSPFv2, it does not require an IPv4 address to function. Therefore, interfaces areonly required to be configured with family inet6(Option D). You do not need "dual-stack" (both IPv4 and IPv6) functionality just to run OSPFv3. The protocol uses the link-local address (fe80::/10) of the interface for neighbor adjacencies and as the next hop for routing updates. This separation allows OSPFv3 to carry multiple "address families" (both IPv4 and IPv6 unicast) if needed, but the base requirement for an IPv6-only network is simply the family inet6 configuration.


NEW QUESTION # 128
How are routing loops prevented in external BGP networks?

Answer: B

Explanation:
BGP is apath-vector protocol, and its primary mechanism for ensuring a loop-free topology across the global internet is theAS_PATHattribute. This attribute is a "well-known mandatory" attribute that records every Autonomous System (AS) a prefix has passed through.
According to Juniper Networks Service Provider documentation, the loop prevention rule forExternal BGP (EBGP)is straightforward: when a router receives a BGP Update from an EBGP peer, it examines the AS_PATH list. If the router's ownlocal AS numberis already present in the list, it indicates that the advertisement has already traversed the local AS and has returned. To prevent a routing loop, the routerwill not use the routeand will implicitly discard the update (Option D).
This behavior is a default, hard-coded function of the BGP protocol and does not require the administrator to write manualrouting policies(Options B and C) to achieve basic loop prevention. While there are advanced features like as-path-expand or allow-as-in that can modify this behavior for specific design requirements (such as in certain Hub-and-Spoke MPLS VPN topologies), the standard operational default is to reject any route where the local AS is detected in the path. This ensures that traffic does not circulate infinitely between Autonomous Systems.


NEW QUESTION # 129
......

VCE4Plus is a trusted platform that is committed to helping Juniper JN0-364 exam candidates in exam preparation. The Juniper JN0-364 exam questions are real and updated and will repeat in the upcoming Juniper JN0-364 Exam. By practicing again and again you will become an expert to solve all the JN0-364 exam questions completely and before the exam time.

JN0-364 Dump Collection: https://www.vce4plus.com/Juniper/JN0-364-valid-vce-dumps.html

2026 Latest VCE4Plus JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1vpQSgqxvgpzh9dM3o0xfeXGO8ORxlpuN